Archive for the ‘Save water’ Category

Energy Saving Tips for Dishwasher

A dishwasher is one of the indispensable appliances in many homes today. It makes dish washing a lot easier and more convenient, thus helping you save a lot of extra time. However, the dishwasher also accounts for a big percentage in energy consumption at home. But by observing several energy-saving tips, you can greatly reduce the amount of energy you consume in dish washing.

Dishwasher Energy-Saving Tips

1. Don’t pre-rinse dishes before loading them to the dishwasher

You can save water as well as time by not pre-rinsing dishes before loading them to the dishwasher. Modern dishwashers are now powerful enough to remove all grime, grease and dirt from dishes. What you can do is to scrape-off leftover food and remove liquid from dishes and the dishwasher will take care of the rest. If there is really a need to pre-rinse, use cold water to save energy on heating.

2. Follow the instruction manual when operating dishwasher

Take time to read the instruction manual for your dishwasher and learn how to properly use it. By following the manufacturer’s instruction especially on how to load dishes, you can achieve maximum efficiency and save energy and water.

3. Utilize the “no-heat air-dry” feature to dry dishes

This feature doesn’t require heating so it lets you save energy. Use this feature if your dishwasher has one. But if you are using older models, you can simply turn off the dishwasher after the final rinse and open its door to air-dry. However, according to some users who tried this method, one major drawback of doing this is the increased spotting in dishes. But it is still worth trying; see for yourself how it will affect your dishes and how much energy you can save.

4. Dry dishes the old-fashioned way     

If you don’t like to have spots on your dishes and still save on energy, better dry the dishes the old fashioned way using a dish towel.

5. Use only the dishwasher in full loads

Regardless, if it’s half-full or fully loaded, the dishwasher will consume the same amount of water in washing so better wait until it’s fully loaded before you turn on the switch. However, be careful also not to overload it as overloading can also cause inefficiency and other malfunctions. If it takes more than a day to get a full load, you can use the rinse and hold feature if your dishwasher has. This is more economical in terms of the amount of water used in pre-rinsing each item.

6. Use the setting that has the most energy saving

Majority of newer models of dishwasher now has energy-saving cycles and settings. As most of the energy in dishwashing is consumed for heating the water, by using the “green” setting, you will be able to use less energy for the same load of dishes.

7. Practice regular dishwasher maintenance

After days or weeks of using the dishwasher, food particles and grime can accumulate in the dishwasher drain and get clogged. This in turn affects the efficiency of the dishwasher. By regularly cleaning the drain, this can maximize the full capacity of your dishwasher while consuming the same amount of energy.

These tips are not all-encompassing. You may have other tested and proven ways to save on energy in using the dishwasher. But nevertheless, by observing these simple tips, you can greatly save on energy consumption and reduce your electricity or water bill.

Thanks to Europro


Read Full Post »


The Problem with Plastics

Studies have shown that water and other beverages in plastic containers may not be safe or desirable. Chemicals in the plastics can leak out into the water. These chemicals may cause a variety of health problems such as cancers, an increased risk of miscarriage, and interference with the body’s hormonal system.

The manufacture of plastic bottles uses large amounts of energy and generates toxic pollutants. Plus, although these plastics may be recycled, millions of plastic bottles end up in landfills each year.

Metal Water Bottles Are a Better Choice

A healthy goal is to stay hydrated by drinking lots of water. It’s still a good plan to carry water with you as you travel, play sports, or go to the gym. In this era of green practices, the new focus is on staying hydrated in the most eco-friendly way.

•    Instead of buying spring water, use filtered tap water.

•    Replace those plastic bottles with portable metal water bottles.

•    Aluminum bottles, such as those made by Sigg, are safe to use and can be reused repeatedly. They can also be recycled eventually

•    Stainless steel bottles, such as those made by Klean Kanteen, are easy to clean and maintain. They can also fit into bicycle water bottle cages.

There are many sources for buying the new metal water bottles. Look in health food and natural food markets. Check out camping and backpacking supply stores. Some coffee shops carry both hot and cold bottles. And, of course, there are many online sources.

As metal bottles become more popular, there are many new brands popping up. Be sure to choose bottles that have non-toxic and non-leaching liners. Metal bottles come in a wide variety of sizes, colors, and patterns. Ideally they should be both durable and lightweight. A wise consumer always researches brands and product quality before buying.

In Summary:

– Be certain that you are choosing a bottle that does not leach, check the recycling symbol on your bottle.

–  If it is a #2 HDPE (high density polyethylene), or a #4 LDPE (low density polyethylene), or a #5 PP (polypropylene), your bottle is fine.

–  The type of plastic bottle in which water is usually sold is usually a #1, and is only recommended for one time use. Do not refill it.

–  Better to use a reusable water bottle, and fill it with your own filtered water from home and keep these single-use bottles out of the landfill. Unfortunately, those fabulous colorful hard plastic lexan bottles made with polycarbonate plastics and identified by the #7 recycling symbol, may leach BPA.

Useful Tips

•    You can carry drinking water in those metal travel coffee mugs, also.

•    Recycle your old plastic Nalgene bottles.

•    Rinse your water bottles frequently and thoroughly.

•    Cut in lemon or lime slices for extra flavor.

•    Add electrolyte powder mixes for that sports drink boost.

•    Get a bottle that can clip on to your belt or tote for easy transport.

Thanks to Who’s green

what kind of bottles you use? share your views in the comments section below.

Read Full Post »

ImageYour water heater is not likely something foremost on your mind, but it can be a potential threat to your home if not given the proper attention. Here are a few things you should know about your water heater so that you can keep it well maintained.

First of all, most water heaters will only last from ten to fifteen years because they are used many times a day and have to work hard. Also, since the water heater uses so much water in a typical day, you need to check it at least once a month so that you can identify problems before they get serious. Due to the fact that water heaters pump so much water every day, most builders will put the water heater in the basement of a home, so that if there is a problem with the water heater, it does not result in water damage to the whole house. The negative effect of this placement is that it tends to create an “out of sight, out of mind” scenario, therefore it’s important to make a conscious effort to perform monthly checks. If your water heater is getting old, you may want to consider just getting a new one instead of waiting for it to break down.

You will need to inspect the water heater periodically, and here is how you do it. First, search for any wet spots or rust on the tank or anywhere around the tank. Either of these are signs of a problem. Rust can make your water heater break down and small leaks can lead to larger problems that can cause serious damage. Next, in the water heater’s main tank, sediment can build up, eventually causing it to perform below par. The water heater should have an instruction manual which will explain how to get this sediment out of the tank. Do this every few months to increase the longevity of your water heater.

Next, check both the pipes going in and out of the water heater. If you think there may be a leak, you should call a professional immediately. In most homes, your water heater will be located next to a floor drain, so that if there is a problem with the machine, it will not cause water damage to your home.

Finally, you should check the bottom drain valve. If there is any sign of rust or corrosion, this could cause problems with the water heater. Doing this quick inspection of your water heater will help you prevent your water heater from breaking down and causing water damage to your home.

Get a brand new Energy efficient water heater from morEnergy call us at 1-866-225-7204

Read Full Post »

ImageWith the monsoon season upon us, we like to remind everyone to think about harvesting rain water.  Here is your simple guide to start saving our most sacred resource: water!




The Eight Principles of Successful Water Harvesting

Courtesy of Brad Lancaster-harvestingrainwater.com

1. Begin with long and thoughtful observation.Use all your senses to see where the water flows and how. What is working, what is not? Build on what works.

2. Start at the top (highpoint) of your watershed and work your way down.Water travels downhill, so collect water at your high points for more immediate infiltration and easy gravity-fed distribution. Start at the top where there is less volume and velocity of water.

3. Start small and simple. Work at the human scale so you can build and repair everything. Many small strategies are far more effective than one big one when you are trying to infiltrate water into the soil.

4. Slow, spread, and infiltrate the flow of water. Rather than having water run erosively off the land’s surface, encourage it to stick around, “walk” around, and infiltrate into the soil. Slow it, spread it, sink it.

5. Always plan an overflow route, and manage that overflow as a resource.Always have an overflow route for the water in times of extra heavy rains, and where possible, use the overflow as a resource.

6. Maximize living and organic groundcover. Create a living sponge so the harvested water is used to create more resources, while the soil’s ability to infiltrate and hold water steadily improves.

7. Maximize beneficial relationships and efficiency by “stacking functions.” Get your water harvesting strategies to do more than hold water. Berms can double as high-and-dry raised paths. Plantings can be placed to cool buildings in summer. Vegetation can be selected to provide food.

8. Continually reassess your system: the “feedback loop.”Observe how your work affects the site, beginning again with the first principle. Make any needed changes, using the principles to guide you.

Principles 2, 4, 5, and 6 are based on those developed and promoted by PELUM, the Participatory Ecological Land-Use Management association of east and southern Africa. Principles 1, 3, 7, and 8 are based on my own experiences and insights gained from other water harvesters.

These principles are the core of successful water harvesting. They apply equally to the conceptualization, design, and implementation of all water-harvesting landscapes. You must integrate all principles, not just your favorites, to realize a site’s full potential. Used together, these principles greatly enhance success, dramatically reduce mistakes, and enable you to adapt and integrate arange of strategies to meet site needs. While the principles remain constant, the strategies you use to achieve them will vary with each unique site.

For a thorough introductory description of water-harvesting principles and additional ethics see Rainwater Harvesting for Drylands and Beyond, Volume 1 (Rainsource Press, 2006).

Thanks to Who’s Green?

If you have any great tips to rain water harvesting or water conservation, please do share in the comments section below.

Read Full Post »


When deciding to make your home more energy efficient and eco-friendly, many people forget about one of the most used rooms in their home – the bathroom. Since the bathroom is so frequently used on a daily basis, and it is where most of the water usage in the home comes from, it is probably an area that is causing you to pay the most money in terms of energy costs. However, it is never too late to make your bathroom as energy efficient as the rest of your home. Keep reading to find out how.

Pick Out Energy Efficient Fixtures:

Toilets: When creating a more energy efficient bathroom, it is useful to think over the kinds of fixtures you choose. Toilets are one of the biggest sources of water usage in the bathroom, especially older toilets. Whether it is a problem like a running toilet or too much water used per flush, older toilets will add to your water bill. There are various new toilets on the market now that are designed to conserve water. These toilets are made to use more suction and less water per flush. This means that more water is being conserved and less is being wasted. This is a great step to take when deciding to make your bathroom greener.

Bathtubs: Your bathtub is another fixture that could be causing you to use more energy than needed in your bathroom, and this is even more true for older bathtubs. Older bathtubs are typically made out of cast iron or steel, which is very cold to lay against when taking a bath. This causes people to raise the temperature of their bath water to make them feel warmer in the tub. Acrylic tubs are warmer to the touch and could help you reduce the amount of hot water you use in the bath. If you do decide to change your tub, you should consider hiring a professional bathroom remodelling company to help get the job done.

Showers: If water consumption is something you care about, you should assess the shower head you are currently using. So many shower heads use tonnes of water per 5 minutes of use. That is a lot of wasted water and a lot of money on your energy bills. A very good choice to make to help decrease your bathroom’s energy consumption is to buy and install a new shower head that uses less water per shower. These shower heads are low pressure and use tonnes less water per 5 minutes of showering which will significantly reduce your energy costs. Assess Your

Lighting Situation:

Energy Efficient Lightbulbs: Lighting is perhaps one of the easiest ways you can lower the amount of energy you consume in your bathroom. It doesn’t matter what kind of lighting system you have, it is as easy as changing the bulbs. Switching from regular bulbs to energy efficient light bulbs may cost a little bit more at first, but the money you save in the long run will far surpass the extra few dollars you spend now. Energy efficient bulbs use only a fraction of the electricity of regular bulbs and last up to 15 times longer. Another way to save some money is to add a dimmer to your new energy efficient bulbs. This way when the bathroom is being used for purposes such as taking a relaxing bath or shower, the lights can by dimmed since they are not needed so bright.

What Do Your Windows Look Like?:

New Windows: Another energy consuming culprit in your bathroom could be your windows, if there are any. There is a lot of moisture in bathrooms and this can cause damage to the windows and window frames over time. This can then lead to leaks of hot and cold air in and out of the bathroom from the window. This can also lead to a spike in your heating and cooling bills. If this is the case, and there is permanent damage to your windows that cannot be fixed, you may want to consider having a new bathroom window installed. Opt for an energy efficient window that will help regulate the temperature in the bathroom. You will find a decrease in your future energy bills for sure.

If you have any other ideas to make your bathroom more energy efficient, Please do share in the comments section below.

Read Full Post »

  • Collect water used for rinsing fruits and vegetables and reuse it to water houseplants.
  • Throw trimmings and peelings from fruits and vegetables into your yard compost instead of using the garbage disposal.
  • Adjust sprinklers so only your lawn is watered and not the house, sidewalk, or street.
  • Use sprinklers that deliver big drops of water close to the ground. Smaller water drops and mist often evaporate before they hit the ground.
  • Water your lawn and garden in the morning or evening when temperatures are cooler to minimize evaporation.
  • Wash your car on the lawn and you’ll water your lawn at the same time.
  • Turn off the water while you wash your car and save more than 370 liters.
  • Wash your pet’s outdoors in an area on your lawn that needs water.
  • When you give your pet fresh water, don’t throw the old water down the drain. Use it to water your houseplants, trees or shrubs.
  • Spreading a layer of organic mulch around plants retains moisture and saves water, time and money.
  • Collect and use rain water for watering your garden. Direct downspouts or gutters toward shrubs or trees.
  • Use a broom instead of a hose to clean your driveway and sidewalk and save up to 300 liters of water!
  • Adjust your lawn mower to a higher setting. A taller lawn shades roots and holds soil moisture better than if it is closely clipped.
  • Mow your lawn as infrequently as possible. Mowing puts your lawn under additional stress, causing it to require more water.
  • When the kids want to cool off, use the sprinkler in an area where your lawn needs it the most.
  • Water only when necessary. More plants die from over-watering than from under-watering.
  • Apply water only as fast as the soil can absorb it.
  • For hanging baskets, planters and pots, place ice cubes under the moss or dirt to give your plants a cool drink of water and help eliminate water overflow.

Read Full Post »

In an effort to lower water bill, I’ve been researching different tactics. Hope it lowers your bill by 15% over the next few months. If you rent, forward this post or print it out for your landlord. Let them know that you’ll do what you can do help and they might just lower your rent, or at least not raise it!

  1. Only use the dishwasher when it’s completely full.
  2. Wash dishes in a large bowl or basin in the sink. That way, you don’t have to fill up the whole sink with water.
  3. Put a brick or water bottle with sand at the bottom in your toilet tank. (Put it in the tank opposite the flushing mechanism so that it will displace the water, therefore using less)
  4. Turn off the water after you brush your teeth.
  5. Turn off the shower when you are putting conditioner/detangling your hair.
  6. Use a low-flow showerhead.
  7. Use self-watering pots in the garden. (They don’t need to be watered as often)
  8. Fix a leaky toilet ASAP!
  9. Reuse your plate, cups and silverware at home. (Don’t grab a new cup every time you’re thirsty!)
  10. Re-wear some of your clothes for less laundry. (Jeans don’t have to be washed every time you wear them)
  11. Hand wash delicates.
  12. Insulate your water pipes with pre-slit foam insulation.
  13. Wash clothes in cold water.
  14. Take a short bath instead of a long shower.
  15. Use a rain barrel to water your garden.
  16. Use energy-star rated dishwasher
  17. Use an energy star rated front-loading washing machine (They statistically use less water)
  18. Install aerators on all faucets (This is really cheap!)
  19. Use washers on spigots and hoses when watering.
  20. Wash your car with a bucket of water, not a constantly flowing hose of water.
  21. Spread organic mulch in your garden, and you’ll have to water less.

Read Full Post »

%d bloggers like this: